KingsFleet™ Traditional Linseed Oil is a time-honored, all-natural wood treatment made from 100% pure, cold-pressed linseed oil that has been filtered, refined, and double-boiled—without any additives or drying agents. Trusted by generations of craftsmen, this oil penetrates deeply to preserve and protect wood, making it ideal for furniture, tool handles, and heirloom pieces. Though it takes longer to cure, its non-toxic and all-natural formula makes it an ideal choice for those looking for a rustic and organic alternative to modern finishes. It’s also used for conditioning metal, sealing stone or terracotta, and as a medium for mixing paint.

USES: 

• Wood Preservation: Penetrates deeply to nourish and protect untreated wood, ideal for indoor use, especially when an all natural alternative with no additives is desired.
• Tool Handle Conditioning: Maintains and protects wooden tool handles, preventing splinters and crack (seal it in with KingsFleet™Tool Handle Wax!)
• Paint Medium: Used as a natural binder in the making of oil paints and traditional primers.
• Natural Wood Sealer: Seals porous surfaces before finishing and, once fully cured, this product is safe for food contact surfaces.
• Metal Rust Prevention: Applied to iron or steel tools to inhibit rust when storing (Not to be applied to cast-iron frying pans, or moving parts).
• Stone & Terracotta Protection: Helps waterproof and enhance the color of natural stone and terracotta pots.Can be used on stone walkways.
• Antique Furniture Maintenance: Restores luster and prevents drying or cracking in heirloom pieces.

This is just an overview of potential uses and applications for KingsFleet™ Traditional Linseed Oil. We encourage proper research before using this product for your particular project, to ensure desired finish and results. If you have any questions please contact us, at: marketing@kingsfleet.ca

KingsFleet™ - Traditional Linseed Oil INSTRUCTIONS:

Preparation:

1. Select a Clean, Dry Work Area

• Ensure the work area is clean and free from dust or dirt, which could contaminate the finish. The environment should be well-ventilated, as the oil may have a strong odor during application.
• Lay down a drop cloth or plastic sheet to protect your workspace from oil drips.

2. Prepare the Wood Surface

• Sanding: If the wood is not already sanded, lightly sand the surface to remove rough patches or imperfections. Start with medium-grit sandpaper (e.g., 120-grit) and finish with fine-grit sandpaper (e.g., 220-grit) to ensure a smooth surface.
• Clean the Surface: After sanding, remove all sanding dust using a tack cloth or a damp cloth. Ensure the surface is completely dry before proceeding.
• Wood Condition: If your wood is particularly dry, you can apply a wood conditioner or lightly dampen the surface with water to open the pores before applying the oil.

3. Protect Your Hands and Surrounding Areas

• Wear rubber gloves to protect your skin from the oil, which can be hard to remove.
• Cover the surrounding areas, as linseed oil can stain fabrics or floors.

Application Process:

4. Apply the First Coat

• Pour the Oil: Pour a small amount of linseed oil onto a clean lint-free cloth, rag, or a soft brush. You don't need to saturate the cloth, just dampen it with oil.
• Apply the Oil: Starting at one edge of the wood surface, apply the oil in long, even strokes, following the grain of the wood. Work in manageable sections, applying a thin, even layer. Be sure to cover all exposed wood areas evenly.
• Work in Sections: For large surfaces, divide the wood into smaller sections to ensure even application and to prevent the oil from drying out before you finish.

5. Let the Oil Soak In

• Allow the oil to soak into the wood for approximately 15–30 minutes. The exact time will vary depending on the wood’s porosity and the humidity in the environment.
• Monitor the Surface: If the wood begins to look dry or dull, it may need more oil. Simply add a little more to the area and allow it to soak in.

6. Wipe Off Excess Oil

• After the oil has had time to soak into the wood, use a clean, dry cloth to wipe off any excess oil that has not been absorbed. This prevents the finish from becoming sticky or tacky and ensures a smooth, even coating.
• Be sure to remove any puddles or streaks of excess oil on the surface. Linseed oil can leave streaks or dark patches if not wiped off properly.

7. Allow the First Coat to Dry

• Allow the first coat of oil to dry for at least 24 hours (or longer, depending on temperature and humidity). The drying time may vary, but it’s essential that the oil is fully absorbed and dried before applying additional coats.
• Tip: The surface should feel dry to the touch and not feel oily or tacky.

Additional Coats (Optional but Recommended):

• 8. Sand Between Coats (Optional)
• To achieve a smooth, glossy finish, you can sand the surface lightly between coats. Use a fine-grit sandpaper (around 320-grit) or fine steel wool to smooth out any imperfections. Be gentle and sand lightly, as the goal is not to remove the oil but to provide a smooth surface for the next layer.
• After sanding, remove all dust with a tack cloth before applying the next coat.
• 9. Apply Additional Coats
• Apply a second (or third) coat of oil using the same method as the first. After wiping off the excess, allow the surface to dry completely before proceeding to the next coat.
• Number of Coats: Generally, 2-3 coats will provide sufficient protection and a beautiful finish, but more coats may be required for high-use items like tabletops or tool handles.

Finishing Touches:

10. Final Buffing (Optional)

• After the final coat of oil has dried, you can buff the surface using a clean, dry cloth or fine steel wool. This will help bring out the natural sheen of the wood and ensure a smooth, glossy finish.
• Buffing between coats and after the final coat will provide a professional, polished look.

11. Curing Time

• Even after the surface feels dry to the touch, the oil will continue to cure and harden for several days or even weeks. Avoid heavy use of the surface during this time, especially in humid environments.
• Final Cure Time: Allow the surface to fully cure for 1–2 weeks before heavy use, especially for high-contact surfaces.
  

Maintenance and Care:

12. Ongoing Care

• To keep the finish looking its best, periodically reapply linseed oil as needed. This will help maintain the protective layer and nourish the wood. Furniture, cutting boards (Traditional Linseed Oil only - we do not recommend Boiled Linseed Oil for food -contact surfaces due to drying agents/curing times), and other frequently used wooden items may require oiling every 6-12 months, depending on usage.

Tips for Success:

• Thinning: If the oil feels too thick, you can thin it with a small amount of mineral spirits or turpentine to help it penetrate the wood more easily.
• Avoid Over-application: Applying too much oil can lead to a sticky or uneven finish, so always wipe off excess oil after each application.
• Ventilation: Make sure your workspace is well-ventilated to avoid inhaling fumes, especially during the drying process.

**By following these step-by-step instructions, you can achieve a beautiful, protective finish on your wooden projects using linseed-based finishing oil. Patience and proper care during application and drying will ensure long-lasting durability and a rich, enhanced appearance of the wood.

<CLICK HERE TO PRINT THESE INSTRUCTIONS>